4v210-08 solenoid valve model specifications, 4v210-08 solenoid valve parameter instructions

4v210-08 solenoid valve model specifications 4v210-08 solenoid valve characteristics and characteristics 1. Pilot mode: internal guide or external guide optional;2. Sliding column structure, good sealing and sensitive response;3. Three-position solenoid valve has three A variety of central functions are available;4. The double-head two-position solenoid valve has a memory function;5. The inner hole is processed with a special process, with small friction resistance, low starting air pressure and long service life;6. No need for lubrication;7. Can be used with The base integrates the valve group to save installation space;8. It is equipped with a manual device to facilitate installation and debugging;9. There are a variety of standard voltage levels available. 4v210-08 Solenoid Valve Parameter Manual 4v210-08 Solenoid Valve Internal Structure 4v210-08 Solenoid Valve Installation and Use Instructions 1. Before use, please check whether the components are damaged during transportation, and then install and use them;2. Please pay attention to the direction of gas flow during installation. And whether the connecting tooth shape is correct. The media used must be filtered through a 40μm filter element;3. Please pay attention to whether the installation conditions meet the technical requirements (such as "voltage", "operating frequency", "working pressure", "usage temperature range", etc.), and then install and use it;4. Installation Pay attention to the direction of gas flow, P is the air inlet, A (B) is the working port, and R (S) is the exhaust port;5. Try to avoid using it in a vibrating environment, and pay attention to anti-freezing measures at low temperatures;6. When connecting pipelines, be careful not to wrap the anti-leak tape beyond the end face of the joint. Pay attention to removing dust, iron filings and other dirt in the pipeline joints to prevent impurities or foreign matter from entering the 4v210-08 solenoid valve body;7. Please pay attention to dust prevention , it is recommended to install a muffler or muffler throttle valve at the exhaust port. When it is removed and not in use, dustproof boots should be installed on the air inlet and outlet. 8. When debugging the whole machine, it is recommended to debug it with manual device first, and then turn on the power for debugging. The above is the model specification of 4v210-08 solenoid valve, and the introduction of the parameter manual of 4v210-08 solenoid valve. If you want to know more relevant information, please log in to Sunway Pneumatic www.diancifa.cc.